Some paint job

After concluding the holes and the support for the board, CDROMs and disks, painting begans. 1 hour to give a varnish coating on this with one of my fantastic and recently bought brushes.

While it dried, i began painting the drawings that I will put in the lateral of the box, also began. Those were made in a 4mm wood. To paint these drawings I used blue varnish, that only turns blue after 8 or more coatings. At the most you can apply 3 coatings per day, that gives approximately 3 days to get the color I want.

The lateral covers after gluing the properly painted drawings.

The case will have as front, two doors, one for access to CDROMs and diskettes, and the other to reach the HDDs. The following picture just shows the lower door, it has a round hole in the middle to install the power button.